Initial import

1 files changed, 245 insertions, 0 deletions

diff --git a/dosbox.conf b/dosbox.conf
new file mode 100644
index 0000000..40a3657
--- /dev/null
+++ b/dosbox.conf
@@ -0,0 +1,245 @@
+# This is the configurationfile for DOSBox 0.74. (Please use the latest version of DOSBox)

+# Lines starting with a # are commentlines and are ignored by DOSBox.

+# They are used to (briefly) document the effect of each option.

+

+[sdl]

+#       fullscreen: Start dosbox directly in fullscreen. (Press ALT-Enter to go back)

+#       fulldouble: Use double buffering in fullscreen. It can reduce screen flickering, but it can also result in a slow DOSBox.

+#   fullresolution: What resolution to use for fullscreen: original or fixed size (e.g. 1024x768).

+#                     Using your monitor's native resolution with aspect=true might give the best results.

+#                     If you end up with small window on a large screen, try an output different from surface.

+# windowresolution: Scale the window to this size IF the output device supports hardware scaling.

+#                     (output=surface does not!)

+#           output: What video system to use for output.

+#                   Possible values: surface, overlay, opengl, openglnb, ddraw.

+#         autolock: Mouse will automatically lock, if you click on the screen. (Press CTRL-F10 to unlock)

+#      sensitivity: Mouse sensitivity.

+#      waitonerror: Wait before closing the console if dosbox has an error.

+#         priority: Priority levels for dosbox. Second entry behind the comma is for when dosbox is not focused/minimized.

+#                     pause is only valid for the second entry.

+#                   Possible values: lowest, lower, normal, higher, highest, pause.

+#       mapperfile: File used to load/save the key/event mappings from. Resetmapper only works with the defaul value.

+#     usescancodes: Avoid usage of symkeys, might not work on all operating systems.

+

+fullscreen=false

+fulldouble=false

+fullresolution=original

+windowresolution=original

+output=opengl

+autolock=true

+sensitivity=100

+waitonerror=true

+priority=higher,normal

+mapperfile=mapper-0.74.map

+usescancodes=true

+

+[dosbox]

+# language: Select another language file.

+#  machine: The type of machine tries to emulate.

+#           Possible values: hercules, cga, tandy, pcjr, ega, vgaonly, svga_s3, svga_et3000, svga_et4000, svga_paradise, vesa_nolfb, vesa_oldvbe.

+# captures: Directory where things like wave, midi, screenshot get captured.

+#  memsize: Amount of memory DOSBox has in megabytes.

+#             This value is best left at its default to avoid problems with some games,

+#             though few games might require a higher value.

+#             There is generally no speed advantage when raising this value.

+

+language=

+machine=svga_s3

+captures=capture

+memsize=64

+

+[render]

+# frameskip: How many frames DOSBox skips before drawing one.

+#    aspect: Do aspect correction, if your output method doesn't support scaling this can slow things down!.

+#    scaler: Scaler used to enlarge/enhance low resolution modes.

+#              If 'forced' is appended, then the scaler will be used even if the result might not be desired.

+#            Possible values: none, normal2x, normal3x, advmame2x, advmame3x, advinterp2x, advinterp3x, hq2x, hq3x, 2xsai, super2xsai, supereagle, tv2x, tv3x, rgb2x, rgb3x, scan2x, scan3x.

+

+frameskip=0

+aspect=false

+scaler=normal2x

+

+[cpu]

+#      core: CPU Core used in emulation. auto will switch to dynamic if available and appropriate.

+#            Possible values: auto, dynamic, normal, simple.

+#   cputype: CPU Type used in emulation. auto is the fastest choice.

+#            Possible values: auto, 386, 386_slow, 486_slow, pentium_slow, 386_prefetch.

+#    cycles: Amount of instructions DOSBox tries to emulate each millisecond.

+#            Setting this value too high results in sound dropouts and lags.

+#            Cycles can be set in 3 ways:

+#              'auto'          tries to guess what a game needs.

+#                              It usually works, but can fail for certain games.

+#              'fixed #number' will set a fixed amount of cycles. This is what you usually need if 'auto' fails.

+#                              (Example: fixed 4000).

+#              'max'           will allocate as much cycles as your computer is able to handle.

+#            

+#            Possible values: auto, fixed, max.

+#   cycleup: Amount of cycles to decrease/increase with keycombo.(CTRL-F11/CTRL-F12)

+# cycledown: Setting it lower than 100 will be a percentage.

+

+core=auto

+cputype=auto

+cycles=max

+cycleup=10

+cycledown=20

+

+[mixer]

+#   nosound: Enable silent mode, sound is still emulated though.

+#      rate: Mixer sample rate, setting any device's rate higher than this will probably lower their sound quality.

+#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.

+# blocksize: Mixer block size, larger blocks might help sound stuttering but sound will also be more lagged.

+#            Possible values: 1024, 2048, 4096, 8192, 512, 256.

+# prebuffer: How many milliseconds of data to keep on top of the blocksize.

+

+nosound=false

+rate=44100

+blocksize=1024

+prebuffer=20

+

+[midi]

+#     mpu401: Type of MPU-401 to emulate.

+#             Possible values: intelligent, uart, none.

+# mididevice: Device that will receive the MIDI data from MPU-401.

+#             Possible values: default, win32, alsa, oss, coreaudio, coremidi, none.

+# midiconfig: Special configuration options for the device driver. This is usually the id of the device you want to use.

+#               See the README/Manual for more details.

+

+mpu401=intelligent

+mididevice=default

+midiconfig=

+

+[sblaster]

+#  sbtype: Type of Soundblaster to emulate. gb is Gameblaster.

+#          Possible values: sb1, sb2, sbpro1, sbpro2, sb16, gb, none.

+#  sbbase: The IO address of the soundblaster.

+#          Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300.

+#     irq: The IRQ number of the soundblaster.

+#          Possible values: 7, 5, 3, 9, 10, 11, 12.

+#     dma: The DMA number of the soundblaster.

+#          Possible values: 1, 5, 0, 3, 6, 7.

+#    hdma: The High DMA number of the soundblaster.

+#          Possible values: 1, 5, 0, 3, 6, 7.

+# sbmixer: Allow the soundblaster mixer to modify the DOSBox mixer.

+# oplmode: Type of OPL emulation. On 'auto' the mode is determined by sblaster type. All OPL modes are Adlib-compatible, except for 'cms'.

+#          Possible values: auto, cms, opl2, dualopl2, opl3, none.

+#  oplemu: Provider for the OPL emulation. compat might provide better quality (see oplrate as well).

+#          Possible values: default, compat, fast.

+# oplrate: Sample rate of OPL music emulation. Use 49716 for highest quality (set the mixer rate accordingly).

+#          Possible values: 44100, 49716, 48000, 32000, 22050, 16000, 11025, 8000.

+

+sbtype=sb16

+sbbase=220

+irq=7

+dma=1

+hdma=5

+sbmixer=true

+oplmode=auto

+oplemu=default

+oplrate=44100

+

+[gus]

+#      gus: Enable the Gravis Ultrasound emulation.

+#  gusrate: Sample rate of Ultrasound emulation.

+#           Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.

+#  gusbase: The IO base address of the Gravis Ultrasound.

+#           Possible values: 240, 220, 260, 280, 2a0, 2c0, 2e0, 300.

+#   gusirq: The IRQ number of the Gravis Ultrasound.

+#           Possible values: 5, 3, 7, 9, 10, 11, 12.

+#   gusdma: The DMA channel of the Gravis Ultrasound.

+#           Possible values: 3, 0, 1, 5, 6, 7.

+# ultradir: Path to Ultrasound directory. In this directory

+#           there should be a MIDI directory that contains

+#           the patch files for GUS playback. Patch sets used

+#           with Timidity should work fine.

+

+gus=false

+gusrate=44100

+gusbase=240

+gusirq=5

+gusdma=3

+ultradir=C:\ULTRASND

+

+[speaker]

+# pcspeaker: Enable PC-Speaker emulation.

+#    pcrate: Sample rate of the PC-Speaker sound generation.

+#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.

+#     tandy: Enable Tandy Sound System emulation. For 'auto', emulation is present only if machine is set to 'tandy'.

+#            Possible values: auto, on, off.

+# tandyrate: Sample rate of the Tandy 3-Voice generation.

+#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.

+#    disney: Enable Disney Sound Source emulation. (Covox Voice Master and Speech Thing compatible).

+

+pcspeaker=true

+pcrate=44100

+tandy=auto

+tandyrate=44100

+disney=true

+

+[joystick]

+# joysticktype: Type of joystick to emulate: auto (default), none,

+#               2axis (supports two joysticks),

+#               4axis (supports one joystick, first joystick used),

+#               4axis_2 (supports one joystick, second joystick used),

+#               fcs (Thrustmaster), ch (CH Flightstick).

+#               none disables joystick emulation.

+#               auto chooses emulation depending on real joystick(s).

+#               (Remember to reset dosbox's mapperfile if you saved it earlier)

+#               Possible values: auto, 2axis, 4axis, 4axis_2, fcs, ch, none.

+#        timed: enable timed intervals for axis. Experiment with this option, if your joystick drifts (away).

+#     autofire: continuously fires as long as you keep the button pressed.

+#       swap34: swap the 3rd and the 4th axis. can be useful for certain joysticks.

+#   buttonwrap: enable button wrapping at the number of emulated buttons.

+

+joysticktype=auto

+timed=true

+autofire=false

+swap34=false

+buttonwrap=false

+

+[serial]

+# serial1: set type of device connected to com port.

+#          Can be disabled, dummy, modem, nullmodem, directserial.

+#          Additional parameters must be in the same line in the form of

+#          parameter:value. Parameter for all types is irq (optional).

+#          for directserial: realport (required), rxdelay (optional).

+#                           (realport:COM1 realport:ttyS0).

+#          for modem: listenport (optional).

+#          for nullmodem: server, rxdelay, txdelay, telnet, usedtr,

+#                         transparent, port, inhsocket (all optional).

+#          Example: serial1=modem listenport:5000

+#          Possible values: dummy, disabled, modem, nullmodem, directserial.

+# serial2: see serial1

+#          Possible values: dummy, disabled, modem, nullmodem, directserial.

+# serial3: see serial1

+#          Possible values: dummy, disabled, modem, nullmodem, directserial.

+# serial4: see serial1

+#          Possible values: dummy, disabled, modem, nullmodem, directserial.

+

+serial1=dummy

+serial2=dummy

+serial3=disabled

+serial4=disabled

+

+[dos]

+#            xms: Enable XMS support.

+#            ems: Enable EMS support.

+#            umb: Enable UMB support.

+# keyboardlayout: Language code of the keyboard layout (or none).

+

+xms=true

+ems=true

+umb=true

+keyboardlayout=auto

+

+[ipx]

+# ipx: Enable ipx over UDP/IP emulation.

+

+ipx=false

+

+[autoexec]

+mount c .

+c:

+call game.exe

+pause

+exit

+