Initial import1.0

1 files changed, 587 insertions, 0 deletions

diff --git a/tools/hex2bin-2.0/src/hex2bin.c b/tools/hex2bin-2.0/src/hex2bin.c
new file mode 100644
index 0000000..7537d8c
--- /dev/null
+++ b/tools/hex2bin-2.0/src/hex2bin.c
@@ -0,0 +1,587 @@
+/*
+  hex2bin converts an Intel hex file to binary.
+
+  Copyright (C) 2015,  Jacques Pelletier
+  checksum extensions Copyright (C) 2004 Rockwell Automation
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without
+  modification, are permitted provided that the following conditions are
+  met:
+  Redistributions of source code must retain the above copyright notice,
+  this list of conditions and the following disclaimer.
+  Redistributions in binary form must reproduce the above copyright notice,
+  this list of conditions and the following disclaimer in the documentation
+  and/or other materials provided with the distribution.
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+  THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+  PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+  20040617 Alf Lacis: Added pad byte (may not always want FF).
+  Added 'break;' to remove GNU compiler warning about label at
+  end of compound statement
+  Added PROGRAM & VERSION strings.
+
+  20071005 PG: Improvements on options parsing
+  20091212 JP: Corrected crash on 0 byte length data records
+  20100402 JP: Corrected bug on physical address calculation for extended
+  linear address record.
+  ADDRESS_MASK is now calculated from MEMORY_SIZE
+
+  20120125 Danny Schneider:
+  Added code for filling a binary file to a given Max_Length relative to
+  Starting Address if Max-Address is larger than Highest-Address
+  20120509 Yoshimasa Nakane:
+  modified error checking (also for output file, JP)
+  20141005 JP: added support for byte swapped hex files
+           corrected bug caused by extra LF at end or within file
+  20141008 JP: removed junk code
+  20141121 Slucx: added line for removing extra CR when entering file name at run time.
+  20141122 Simone Fratini: small feature added
+  20150116 Richard Genoud (Paratronic): correct buffer overflows/wrong results with the -l flag
+  20150122 JP: added support for different check methods
+  20150221 JP: rewrite of the checksum write/force value
+*/
+
+#define PROGRAM "hex2bin"
+#define VERSION "2.0"
+
+#include "common.h"
+
+#define NO_ADDRESS_TYPE_SELECTED 0
+#define LINEAR_ADDRESS 1
+#define SEGMENTED_ADDRESS 2
+
+const char *Pgm_Name = PROGRAM;
+
+int main (int argc, char *argv[])
+{
+    /* line inputted from file */
+    char Line[MAX_LINE_SIZE];
+
+    /* flag that a file was read */
+    bool Fileread;
+
+    /* cmd-line parameter # */
+    char *p;
+
+    int Param,result;
+
+    /* Application specific */
+
+    unsigned int Nb_Bytes;
+    unsigned int First_Word, Address, Segment, Upper_Address;
+    unsigned int Phys_Addr, Type;
+    unsigned int temp;
+    unsigned int Records_Start; // Lowest address of the records
+
+    /* We will assume that when one type of addressing is selected, it will be valid for all the
+     current file. Records for the other type will be ignored. */
+    unsigned int Seg_Lin_Select = NO_ADDRESS_TYPE_SELECTED;
+
+    unsigned int temp2;
+
+    byte	Data_Str[MAX_LINE_SIZE];
+
+    fprintf (stdout,PROGRAM" v"VERSION", Copyright (C) 2015 Jacques Pelletier & contributors\n\n");
+
+    if (argc == 1)
+        usage();
+
+    strcpy(Extension, "bin"); /* default is for binary file extension */
+
+    /* read file */
+    Starting_Address = 0;
+
+    /*
+    use p for parsing arguments
+    use i for number of parameters to skip
+    use c for the current option
+    */
+    for (Param = 1; Param < argc; Param++)
+    {
+        int i = 0;
+        char c;
+
+        p = argv[Param];
+        c = *(p+1); /* Get option character */
+
+		if ( _IS_OPTION_(*p) )
+        {
+            // test for no space between option and parameter
+            if (strlen(p) != 2) usage();
+
+            switch(c)
+            {
+            /* file extension */
+            case 'c':
+                Enable_Checksum_Error = true;
+                i = 0;
+                break;
+            case 'd':
+                DisplayCheckMethods();
+            case 'e':
+                GetExtension(argv[Param + 1],Extension);
+                i = 1; /* add 1 to Param */
+                break;
+            case 'E':
+                Endian = GetBin(argv[Param + 1]);
+                i = 1; /* add 1 to Param */
+                break;
+            case 'f':
+                Cks_Addr = GetHex(argv[Param + 1]);
+                Cks_Addr_set = true;
+                i = 1; /* add 1 to Param */
+                break;
+            case 'F':
+                Cks_Addr = GetHex(argv[Param + 1]);
+                Cks_Value = GetHex(argv[Param + 2]);
+                Force_Value = true;
+                i = 2; /* add 2 to Param */
+                break;
+            case 'k':
+                Cks_Type = GetHex(argv[Param + 1]);
+                {
+                    if (Cks_Type > LAST_CHECK_METHOD) usage();
+                }
+                i = 1; /* add 1 to Param */
+                break;
+            case 'l':
+                Max_Length = GetHex(argv[Param + 1]);
+				if (Max_Length > 0x800000)
+				{
+					fprintf(stderr,"Max_Length = %u\n", Max_Length);
+					exit(1);
+				}
+                Max_Length_Setted = true;
+                i = 1; /* add 1 to Param */
+                break;
+            case 'm':
+                Minimum_Block_Size = GetHex(argv[Param + 1]);
+                Minimum_Block_Size_Setted = true;
+                i = 1; /* add 1 to Param */
+                break;
+            case 'p':
+                Pad_Byte = GetHex(argv[Param + 1]);
+                i = 1; /* add 1 to Param */
+                break;
+            case 'r':
+                Cks_Start = GetHex(argv[Param + 1]);
+                Cks_End = GetHex(argv[Param + 2]);
+                Cks_range_set = true;
+                i = 2; /* add 2 to Param */
+                break;
+            case 's':
+                Starting_Address = GetHex(argv[Param + 1]);
+                Starting_Address_Setted = true;
+                i = 1; /* add 1 to Param */
+                break;
+            case 'w':
+                Swap_Wordwise = true;
+                i = 0;
+                break;
+            case 'C':
+                Crc_Poly = GetHex(argv[Param + 1]);
+                Crc_Init = GetHex(argv[Param + 2]);
+                Crc_RefIn = GetBoolean(argv[Param + 3]);
+                Crc_RefOut = GetBoolean(argv[Param + 4]);
+                Crc_XorOut = GetHex(argv[Param + 5]);
+                CrcParamsCheck();
+                i = 5; /* add 5 to Param */
+                break;
+
+            case '?':
+            case 'h':
+            default:
+                usage();
+            } /* switch */
+
+            /* Last parameter is not a filename */
+            if (Param == argc-1) usage();
+
+            /* if (Param + i) < (argc -1) */
+            if (Param < argc -1 -i) Param += i;
+            else usage();
+
+        }
+        else
+            break;
+        /* if option */
+    } /* for Param */
+
+    /* when user enters input file name */
+
+    /* Assume last parameter is filename */
+    strcpy(Filename,argv[argc -1]);
+
+    /* Just a normal file name */
+    NoFailOpenInputFile (Filename);
+    PutExtension(Filename, Extension);
+    NoFailOpenOutputFile(Filename);
+    Fileread = true;
+
+    /* To begin, assume the lowest address is at the end of the memory.
+     While reading each records, subsequent addresses will lower this number.
+     At the end of the input file, this value will be the lowest address.
+
+     A similar assumption is made for highest address. It starts at the
+     beginning of memory. While reading each records, subsequent addresses will raise this number.
+     At the end of the input file, this value will be the highest address. */
+    Lowest_Address = (unsigned int)-1;
+    Highest_Address = 0;
+    Records_Start = 0;
+    Segment = 0;
+    Upper_Address = 0;
+    Record_Nb = 0;    // Used for reporting errors
+
+    /* get highest and lowest addresses so that we can allocate the right size */
+    do
+    {
+        unsigned int i;
+
+        /* Read a line from input file. */
+        GetLine(Line,Filin);
+        Record_Nb++;
+
+        /* Remove carriage return/line feed at the end of line. */
+        i = strlen(Line);
+
+        if (--i != 0)
+        {
+            if (Line[i] == '\n') Line[i] = '\0';
+
+            /* Scan the first two bytes and nb of bytes.
+               The two bytes are read in First_Word since its use depend on the
+               record type: if it's an extended address record or a data record.
+               */
+            result = sscanf (Line, ":%2x%4x%2x%s",&Nb_Bytes,&First_Word,&Type,Data_Str);
+            if (result != 4) fprintf(stderr,"Error in line %d of hex file\n", Record_Nb);
+
+            p = (char *) Data_Str;
+
+            /* If we're reading the last record, ignore it. */
+            switch (Type)
+            {
+            /* Data record */
+            case 0:
+                if (Nb_Bytes == 0)
+                    break;
+
+                Address = First_Word;
+
+                if (Seg_Lin_Select == SEGMENTED_ADDRESS)
+                {
+                    Phys_Addr = (Segment << 4) + Address;
+                }
+                else
+                {
+                    /* LINEAR_ADDRESS or NO_ADDRESS_TYPE_SELECTED
+                       Upper_Address = 0 as specified in the Intel spec. until an extended address
+                       record is read. */
+                    Phys_Addr = ((Upper_Address << 16) + Address);
+                }
+
+                /* Set the lowest address as base pointer. */
+                if (Phys_Addr < Lowest_Address)
+                    Lowest_Address = Phys_Addr;
+
+                /* Same for the top address. */
+                temp = Phys_Addr + Nb_Bytes -1;
+
+                if (temp > Highest_Address)
+                    Highest_Address = temp;
+
+                break;
+
+            case 2:
+                /* First_Word contains the offset. It's supposed to be 0000 so
+                   we ignore it. */
+
+                /* First extended segment address record ? */
+                if (Seg_Lin_Select == NO_ADDRESS_TYPE_SELECTED)
+                    Seg_Lin_Select = SEGMENTED_ADDRESS;
+
+                /* Then ignore subsequent extended linear address records */
+                if (Seg_Lin_Select == SEGMENTED_ADDRESS)
+                {
+                    result = sscanf (p, "%4x%2x",&Segment,&temp2);
+					if (result != 2) fprintf(stderr,"Error in line %d of hex file\n", Record_Nb);
+
+                    /* Update the current address. */
+                    Phys_Addr = (Segment << 4);
+                }
+                else
+                {
+                    fprintf(stderr,"Ignored extended linear address record %d\n", Record_Nb);
+                }
+                break;
+
+            case 4:
+                /* First_Word contains the offset. It's supposed to be 0000 so
+                   we ignore it. */
+
+                /* First extended linear address record ? */
+                if (Seg_Lin_Select == NO_ADDRESS_TYPE_SELECTED)
+                    Seg_Lin_Select = LINEAR_ADDRESS;
+
+                /* Then ignore subsequent extended segment address records */
+                if (Seg_Lin_Select == LINEAR_ADDRESS)
+                {
+                    result = sscanf (p, "%4x%2x",&Upper_Address,&temp2);
+					if (result != 2) fprintf(stderr,"Error in line %d of hex file\n", Record_Nb);
+
+                    /* Update the current address. */
+                    Phys_Addr = (Upper_Address << 16);
+                }
+                else
+                {
+                    fprintf(stderr,"Ignored extended segment address record %d\n", Record_Nb);
+                }
+                break;
+
+            default:
+                break;
+            }
+        }
+    }
+    while (!feof (Filin));
+
+    rewind(Filin);
+    Segment = 0;
+    Upper_Address = 0;
+    Record_Nb = 0;
+
+    if (Starting_Address_Setted == true)
+    {
+        Records_Start = Lowest_Address;
+        Lowest_Address = Starting_Address;
+    }
+    else
+    {
+        Records_Start = Lowest_Address;
+        Starting_Address = Lowest_Address;
+    }
+
+    if (Max_Length_Setted == false)
+        Max_Length = Highest_Address - Lowest_Address + 1;
+    else
+        Highest_Address = Lowest_Address + Max_Length - 1;
+
+    /* Now, that we know the buffer size, we can allocate it. */
+    /* allocate a buffer */
+    Memory_Block = (byte *) NoFailMalloc(Max_Length);
+
+    /* For EPROM or FLASH memory types, fill unused bytes with FF or the value specified by the p option */
+    memset (Memory_Block,Pad_Byte,Max_Length);
+
+    /* Read the file & process the lines. */
+    do /* repeat until EOF(Filin) */
+    {
+        unsigned int i;
+
+        /* Read a line from input file. */
+        GetLine(Line,Filin);
+        Record_Nb++;
+
+        /* Remove carriage return/line feed at the end of line. */
+        i = strlen(Line);
+
+        //fprintf(stderr,"Record: %d; length: %d\n", Record_Nb, i);
+
+        if (--i != 0)
+        {
+            if (Line[i] == '\n') Line[i] = '\0';
+
+            /* Scan the first two bytes and nb of bytes.
+               The two bytes are read in First_Word since its use depend on the
+               record type: if it's an extended address record or a data record.
+            */
+            result = sscanf (Line, ":%2x%4x%2x%s",&Nb_Bytes,&First_Word,&Type,Data_Str);
+            if (result != 4) fprintf(stderr,"Error in line %d of hex file\n", Record_Nb);
+
+            Checksum = Nb_Bytes + (First_Word >> 8) + (First_Word & 0xFF) + Type;
+
+            p = (char *) Data_Str;
+
+            /* If we're reading the last record, ignore it. */
+            switch (Type)
+            {
+            /* Data record */
+            case 0:
+                if (Nb_Bytes == 0)
+                {
+                    fprintf(stderr,"0 byte length Data record ignored\n");
+                    break;
+                }
+
+                Address = First_Word;
+
+                if (Seg_Lin_Select == SEGMENTED_ADDRESS)
+                    Phys_Addr = (Segment << 4) + Address;
+                else
+                    /* LINEAR_ADDRESS or NO_ADDRESS_TYPE_SELECTED
+                       Upper_Address = 0 as specified in the Intel spec. until an extended address
+                       record is read. */
+                    Phys_Addr = ((Upper_Address << 16) + Address);
+
+                /* Check that the physical address stays in the buffer's range. */
+                if ((Phys_Addr >= Lowest_Address) && (Phys_Addr <= Highest_Address))
+                {
+                    /* The memory block begins at Lowest_Address */
+                    Phys_Addr -= Lowest_Address;
+
+                    /* Read the Data bytes. */
+                    /* Bytes are written in the Memory block even if checksum is wrong. */
+                    i = Nb_Bytes;
+
+                    do
+                    {
+                        result = sscanf (p, "%2x",&temp2);
+                        if (result != 1) fprintf(stderr,"Error in line %d of hex file\n", Record_Nb);
+                        p += 2;
+
+                        /* Check that the physical address stays in the buffer's range. */
+                        if (Phys_Addr < Max_Length)
+                        {
+                            /* Overlapping record will erase the pad bytes */
+                            if (Swap_Wordwise)
+                            {
+                                if (Memory_Block[Phys_Addr ^ 1] != Pad_Byte) fprintf(stderr,"Overlapped record detected\n");
+                                Memory_Block[Phys_Addr++ ^ 1] = temp2;
+                            }
+                            else
+                            {
+                                if (Memory_Block[Phys_Addr] != Pad_Byte) fprintf(stderr,"Overlapped record detected\n");
+                                Memory_Block[Phys_Addr++] = temp2;
+                            }
+
+                            Checksum = (Checksum + temp2) & 0xFF;
+                        }
+                    }
+                    while (--i != 0);
+
+                    /* Read the Checksum value. */
+                    result = sscanf (p, "%2x",&temp2);
+                    if (result != 1) fprintf(stderr,"Error in line %d of hex file\n", Record_Nb);
+
+					/* Verify Checksum value. */
+                    Checksum = (Checksum + temp2) & 0xFF;
+                    VerifyChecksumValue();
+                }
+                else
+                {
+                    if (Seg_Lin_Select == SEGMENTED_ADDRESS)
+                        fprintf(stderr,"Data record skipped at %4X:%4X\n",Segment,Address);
+                    else
+                        fprintf(stderr,"Data record skipped at %8X\n",Phys_Addr);
+                }
+
+                break;
+
+            /* End of file record */
+            case 1:
+                /* Simply ignore checksum errors in this line. */
+                break;
+
+            /* Extended segment address record */
+            case 2:
+                /* First_Word contains the offset. It's supposed to be 0000 so
+                   we ignore it. */
+
+                /* First extended segment address record ? */
+                if (Seg_Lin_Select == NO_ADDRESS_TYPE_SELECTED)
+                    Seg_Lin_Select = SEGMENTED_ADDRESS;
+
+                /* Then ignore subsequent extended linear address records */
+                if (Seg_Lin_Select == SEGMENTED_ADDRESS)
+                {
+                    result = sscanf (p, "%4x%2x",&Segment,&temp2);
+                    if (result != 2) fprintf(stderr,"Error in line %d of hex file\n", Record_Nb);
+
+                    /* Update the current address. */
+                    Phys_Addr = (Segment << 4);
+
+                    /* Verify Checksum value. */
+                    Checksum = (Checksum + (Segment >> 8) + (Segment & 0xFF) + temp2) & 0xFF;
+					VerifyChecksumValue();
+                }
+                break;
+
+            /* Start segment address record */
+            case 3:
+                /* Nothing to be done since it's for specifying the starting address for
+                   execution of the binary code */
+                break;
+
+            /* Extended linear address record */
+            case 4:
+                /* First_Word contains the offset. It's supposed to be 0000 so
+                   we ignore it. */
+
+                /* First extended linear address record ? */
+                if (Seg_Lin_Select == NO_ADDRESS_TYPE_SELECTED)
+                    Seg_Lin_Select = LINEAR_ADDRESS;
+
+                /* Then ignore subsequent extended segment address records */
+                if (Seg_Lin_Select == LINEAR_ADDRESS)
+                {
+                    result = sscanf (p, "%4x%2x",&Upper_Address,&temp2);
+                    if (result != 2) fprintf(stderr,"Error in line %d of hex file\n", Record_Nb);
+
+                    /* Update the current address. */
+                    Phys_Addr = (Upper_Address << 16);
+
+                    /* Verify Checksum value. */
+                    Checksum = (Checksum + (Upper_Address >> 8) + (Upper_Address & 0xFF) + temp2)
+                               & 0xFF;
+					VerifyChecksumValue();
+                }
+                break;
+
+            /* Start linear address record */
+            case 5:
+                /* Nothing to be done since it's for specifying the starting address for
+                   execution of the binary code */
+                break;
+            default:
+                fprintf(stderr,"Unknown record type\n");
+                break;
+            }
+        }
+    }
+    while (!feof (Filin));
+    /*-----------------------------------------------------------------------------*/
+
+    fprintf(stdout,"Binary file start = %08X\n",Lowest_Address);
+    fprintf(stdout,"Records start     = %08X\n",Records_Start);
+    fprintf(stdout,"Highest address   = %08X\n",Highest_Address);
+    fprintf(stdout,"Pad Byte          = %X\n",  Pad_Byte);
+
+	WriteMemory();
+
+#ifdef USE_FILE_BUFFERS
+    free (FilinBuf);
+    free (FiloutBuf);
+#endif
+
+    fclose (Filin);
+    fclose (Filout);
+
+    if (Status_Checksum_Error && Enable_Checksum_Error)
+    {
+        fprintf(stderr,"Checksum error detected.\n");
+        return 1;
+    }
+
+    if (!Fileread)
+        usage();
+    return 0;
+}