Kitty conf

1 files changed, 1306 insertions, 0 deletions

diff --git a/kitty.conf b/kitty.conf
new file mode 100644
index 0000000..0052aa5
--- /dev/null
+++ b/kitty.conf
@@ -0,0 +1,1306 @@
+#:
+#:  ln -s ~/.vim/kitty.conf .config/kitty/kitty.conf
+#:
+
+#: Fonts {{{
+
+#: kitty has very powerful font management. You can configure
+#: individual font faces and even specify special fonts for particular
+#: characters.
+
+font_family      JetBrains Mono
+bold_font        auto
+italic_font      auto
+bold_italic_font auto
+
+#: You can specify different fonts for the bold/italic/bold-italic
+#: variants. To get a full list of supported fonts use the `kitty
+#: list-fonts` command. By default they are derived automatically, by
+#: the OSes font system. Setting them manually is useful for font
+#: families that have many weight variants like Book, Medium, Thick,
+#: etc. For example::
+
+#:     font_family      Operator Mono Book
+#:     bold_font        Operator Mono Medium
+#:     italic_font      Operator Mono Book Italic
+#:     bold_italic_font Operator Mono Medium Italic
+
+font_size 10.0
+
+#: Font size (in pts)
+
+force_ltr no
+
+#: kitty does not support BIDI (bidirectional text), however, for RTL
+#: scripts, words are automatically displayed in RTL. That is to say,
+#: in an RTL script, the words "HELLO WORLD" display in kitty as
+#: "WORLD HELLO", and if you try to select a substring of an RTL-
+#: shaped string, you will get the character that would be there had
+#: the the string been LTR. For example, assuming the Hebrew word
+#: ירושלים, selecting the character that on the screen appears to be ם
+#: actually writes into the selection buffer the character י.
+
+#: kitty's default behavior is useful in conjunction with a filter to
+#: reverse the word order, however, if you wish to manipulate RTL
+#: glyphs, it can be very challenging to work with, so this option is
+#: provided to turn it off. Furthermore, this option can be used with
+#: the command line program GNU FriBidi
+#: <https://github.com/fribidi/fribidi#executable> to get BIDI
+#: support, because it will force kitty to always treat the text as
+#: LTR, which FriBidi expects for terminals.
+
+adjust_line_height  0
+adjust_column_width 0
+
+#: Change the size of each character cell kitty renders. You can use
+#: either numbers, which are interpreted as pixels or percentages
+#: (number followed by %), which are interpreted as percentages of the
+#: unmodified values. You can use negative pixels or percentages less
+#: than 100% to reduce sizes (but this might cause rendering
+#: artifacts).
+
+# symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols
+
+#: Map the specified unicode codepoints to a particular font. Useful
+#: if you need special rendering for some symbols, such as for
+#: Powerline. Avoids the need for patched fonts. Each unicode code
+#: point is specified in the form U+<code point in hexadecimal>. You
+#: can specify multiple code points, separated by commas and ranges
+#: separated by hyphens. symbol_map itself can be specified multiple
+#: times. Syntax is::
+
+#:     symbol_map codepoints Font Family Name
+
+disable_ligatures never
+
+#: Choose how you want to handle multi-character ligatures. The
+#: default is to always render them.  You can tell kitty to not render
+#: them when the cursor is over them by using cursor to make editing
+#: easier, or have kitty never render them at all by using always, if
+#: you don't like them. The ligature strategy can be set per-window
+#: either using the kitty remote control facility or by defining
+#: shortcuts for it in kitty.conf, for example::
+
+#:     map alt+1 disable_ligatures_in active always
+#:     map alt+2 disable_ligatures_in all never
+#:     map alt+3 disable_ligatures_in tab cursor
+
+#: Note that this refers to programming ligatures, typically
+#: implemented using the calt OpenType feature. For disabling general
+#: ligatures, use the font_features setting.
+
+font_features none
+
+#: Choose exactly which OpenType features to enable or disable. This
+#: is useful as some fonts might have features worthwhile in a
+#: terminal. For example, Fira Code Retina includes a discretionary
+#: feature, zero, which in that font changes the appearance of the
+#: zero (0), to make it more easily distinguishable from Ø. Fira Code
+#: Retina also includes other discretionary features known as
+#: Stylistic Sets which have the tags ss01 through ss20.
+
+#: Note that this code is indexed by PostScript name, and not the font
+#: family. This allows you to define very precise feature settings;
+#: e.g. you can disable a feature in the italic font but not in the
+#: regular font.
+
+#: To get the PostScript name for a font, use kitty + list-fonts
+#: --psnames::
+
+#:     $ kitty + list-fonts --psnames | grep Fira
+#:     Fira Code
+#:     Fira Code Bold (FiraCode-Bold)
+#:     Fira Code Light (FiraCode-Light)
+#:     Fira Code Medium (FiraCode-Medium)
+#:     Fira Code Regular (FiraCode-Regular)
+#:     Fira Code Retina (FiraCode-Retina)
+
+#: The part in brackets is the PostScript name.
+
+#: Enable alternate zero and oldstyle numerals::
+
+#:     font_features FiraCode-Retina +zero +onum
+
+#: Enable only alternate zero::
+
+#:     font_features FiraCode-Retina +zero
+
+#: Disable the normal ligatures, but keep the calt feature which (in
+#: this font) breaks up monotony::
+
+#:     font_features TT2020StyleB-Regular -liga +calt
+
+#: In conjunction with force_ltr, you may want to disable Arabic
+#: shaping entirely, and only look at their isolated forms if they
+#: show up in a document. You can do this with e.g.::
+
+#:     font_features UnifontMedium +isol -medi -fina -init
+
+box_drawing_scale 0.001, 1, 1.5, 2
+
+#: Change the sizes of the lines used for the box drawing unicode
+#: characters These values are in pts. They will be scaled by the
+#: monitor DPI to arrive at a pixel value. There must be four values
+#: corresponding to thin, normal, thick, and very thick lines.
+
+#: }}}
+
+#: Cursor customization {{{
+
+cursor #cccccc
+
+#: Default cursor color
+
+cursor_text_color #111111
+
+#: Choose the color of text under the cursor. If you want it rendered
+#: with the background color of the cell underneath instead, use the
+#: special keyword: background
+
+cursor_shape block
+
+#: The cursor shape can be one of (block, beam, underline)
+
+cursor_beam_thickness 1.5
+
+#: Defines the thickness of the beam cursor (in pts)
+
+cursor_underline_thickness 2.0
+
+#: Defines the thickness of the underline cursor (in pts)
+
+cursor_blink_interval 0
+
+#: The interval (in seconds) at which to blink the cursor. Set to zero
+#: to disable blinking. Negative values mean use system default. Note
+#: that numbers smaller than repaint_delay will be limited to
+#: repaint_delay.
+
+cursor_stop_blinking_after 15.0
+
+#: Stop blinking cursor after the specified number of seconds of
+#: keyboard inactivity.  Set to zero to never stop blinking.
+
+#: }}}
+
+#: Scrollback {{{
+
+scrollback_lines 2000
+
+#: Number of lines of history to keep in memory for scrolling back.
+#: Memory is allocated on demand. Negative numbers are (effectively)
+#: infinite scrollback. Note that using very large scrollback is not
+#: recommended as it can slow down resizing of the terminal and also
+#: use large amounts of RAM.
+
+scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER
+
+#: Program with which to view scrollback in a new window. The
+#: scrollback buffer is passed as STDIN to this program. If you change
+#: it, make sure the program you use can handle ANSI escape sequences
+#: for colors and text formatting. INPUT_LINE_NUMBER in the command
+#: line above will be replaced by an integer representing which line
+#: should be at the top of the screen. Similarly CURSOR_LINE and
+#: CURSOR_COLUMN will be replaced by the current cursor position.
+
+scrollback_pager_history_size 0
+
+#: Separate scrollback history size, used only for browsing the
+#: scrollback buffer (in MB). This separate buffer is not available
+#: for interactive scrolling but will be piped to the pager program
+#: when viewing scrollback buffer in a separate window. The current
+#: implementation stores one character in 4 bytes, so approximatively
+#: 2500 lines per megabyte at 100 chars per line. A value of zero or
+#: less disables this feature. The maximum allowed size is 4GB.
+
+wheel_scroll_multiplier 5.0
+
+#: Modify the amount scrolled by the mouse wheel. Note this is only
+#: used for low precision scrolling devices, not for high precision
+#: scrolling on platforms such as macOS and Wayland. Use negative
+#: numbers to change scroll direction.
+
+touch_scroll_multiplier 1.0
+
+#: Modify the amount scrolled by a touchpad. Note this is only used
+#: for high precision scrolling devices on platforms such as macOS and
+#: Wayland. Use negative numbers to change scroll direction.
+
+#: }}}
+
+#: Mouse {{{
+
+mouse_hide_wait 3.0
+
+#: Hide mouse cursor after the specified number of seconds of the
+#: mouse not being used. Set to zero to disable mouse cursor hiding.
+#: Set to a negative value to hide the mouse cursor immediately when
+#: typing text. Disabled by default on macOS as getting it to work
+#: robustly with the ever-changing sea of bugs that is Cocoa is too
+#: much effort.
+
+url_color #0087bd
+url_style curly
+
+#: The color and style for highlighting URLs on mouse-over. url_style
+#: can be one of: none, single, double, curly
+
+open_url_modifiers kitty_mod
+
+#: The modifier keys to press when clicking with the mouse on URLs to
+#: open the URL
+
+open_url_with default
+
+#: The program with which to open URLs that are clicked on. The
+#: special value default means to use the operating system's default
+#: URL handler.
+
+url_prefixes http https file ftp
+
+#: The set of URL prefixes to look for when detecting a URL under the
+#: mouse cursor.
+
+copy_on_select no
+
+#: Copy to clipboard or a private buffer on select. With this set to
+#: clipboard, simply selecting text with the mouse will cause the text
+#: to be copied to clipboard. Useful on platforms such as macOS that
+#: do not have the concept of primary selections. You can instead
+#: specify a name such as a1 to copy to a private kitty buffer
+#: instead. Map a shortcut with the paste_from_buffer action to paste
+#: from this private buffer. For example::
+
+#:     map cmd+shift+v paste_from_buffer a1
+
+#: Note that copying to the clipboard is a security risk, as all
+#: programs, including websites open in your browser can read the
+#: contents of the system clipboard.
+
+strip_trailing_spaces never
+
+#: Remove spaces at the end of lines when copying to clipboard. A
+#: value of smart will do it when using normal selections, but not
+#: rectangle selections. always will always do it.
+
+rectangle_select_modifiers ctrl+alt
+
+#: The modifiers to use rectangular selection (i.e. to select text in
+#: a rectangular block with the mouse)
+
+terminal_select_modifiers shift
+
+#: The modifiers to override mouse selection even when a terminal
+#: application has grabbed the mouse
+
+select_by_word_characters @-./_~?&=%+#
+
+#: Characters considered part of a word when double clicking. In
+#: addition to these characters any character that is marked as an
+#: alphanumeric character in the unicode database will be matched.
+
+click_interval -1.0
+
+#: The interval between successive clicks to detect double/triple
+#: clicks (in seconds). Negative numbers will use the system default
+#: instead, if available, or fallback to 0.5.
+
+focus_follows_mouse no
+
+#: Set the active window to the window under the mouse when moving the
+#: mouse around
+
+pointer_shape_when_grabbed arrow
+
+#: The shape of the mouse pointer when the program running in the
+#: terminal grabs the mouse. Valid values are: arrow, beam and hand
+
+#: }}}
+
+#: Performance tuning {{{
+
+repaint_delay 10
+
+#: Delay (in milliseconds) between screen updates. Decreasing it,
+#: increases frames-per-second (FPS) at the cost of more CPU usage.
+#: The default value yields ~100 FPS which is more than sufficient for
+#: most uses. Note that to actually achieve 100 FPS you have to either
+#: set sync_to_monitor to no or use a monitor with a high refresh
+#: rate. Also, to minimize latency when there is pending input to be
+#: processed, repaint_delay is ignored.
+
+input_delay 3
+
+#: Delay (in milliseconds) before input from the program running in
+#: the terminal is processed. Note that decreasing it will increase
+#: responsiveness, but also increase CPU usage and might cause flicker
+#: in full screen programs that redraw the entire screen on each loop,
+#: because kitty is so fast that partial screen updates will be drawn.
+
+sync_to_monitor yes
+
+#: Sync screen updates to the refresh rate of the monitor. This
+#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing)
+#: when scrolling. However, it limits the rendering speed to the
+#: refresh rate of your monitor. With a very high speed mouse/high
+#: keyboard repeat rate, you may notice some slight input latency. If
+#: so, set this to no.
+
+#: }}}
+
+#: Terminal bell {{{
+
+enable_audio_bell yes
+
+#: Enable/disable the audio bell. Useful in environments that require
+#: silence.
+
+visual_bell_duration 0.0
+
+#: Visual bell duration. Flash the screen when a bell occurs for the
+#: specified number of seconds. Set to zero to disable.
+
+window_alert_on_bell yes
+
+#: Request window attention on bell. Makes the dock icon bounce on
+#: macOS or the taskbar flash on linux.
+
+bell_on_tab yes
+
+#: Show a bell symbol on the tab if a bell occurs in one of the
+#: windows in the tab and the window is not the currently focused
+#: window
+
+command_on_bell none
+
+#: Program to run when a bell occurs.
+
+#: }}}
+
+#: Window layout {{{
+
+remember_window_size  yes
+initial_window_width  640
+initial_window_height 400
+
+#: If enabled, the window size will be remembered so that new
+#: instances of kitty will have the same size as the previous
+#: instance. If disabled, the window will initially have size
+#: configured by initial_window_width/height, in pixels. You can use a
+#: suffix of "c" on the width/height values to have them interpreted
+#: as number of cells instead of pixels.
+
+enabled_layouts *
+
+#: The enabled window layouts. A comma separated list of layout names.
+#: The special value all means all layouts. The first listed layout
+#: will be used as the startup layout. Default configuration is all
+#: layouts in alphabetical order. For a list of available layouts, see
+#: the https://sw.kovidgoyal.net/kitty/index.html#layouts.
+
+window_resize_step_cells 2
+window_resize_step_lines 2
+
+#: The step size (in units of cell width/cell height) to use when
+#: resizing windows. The cells value is used for horizontal resizing
+#: and the lines value for vertical resizing.
+
+window_border_width 1.0
+
+#: The width (in pts) of window borders. Will be rounded to the
+#: nearest number of pixels based on screen resolution. Note that
+#: borders are displayed only when more than one window is visible.
+#: They are meant to separate multiple windows.
+
+draw_minimal_borders yes
+
+#: Draw only the minimum borders needed. This means that only the
+#: minimum needed borders for inactive windows are drawn. That is only
+#: the borders that separate the inactive window from a neighbor. Note
+#: that setting a non-zero window margin overrides this and causes all
+#: borders to be drawn.
+
+window_margin_width 0
+
+#: The window margin (in pts) (blank area outside the border). A
+#: single value sets all four sides. Two values set the vertical and
+#: horizontal sides. Three values set top, horizontal and bottom. Four
+#: values set top, right, bottom and left.
+
+single_window_margin_width -1
+
+#: The window margin (in pts) to use when only a single window is
+#: visible. Negative values will cause the value of
+#: window_margin_width to be used instead. A single value sets all
+#: four sides. Two values set the vertical and horizontal sides. Three
+#: values set top, horizontal and bottom. Four values set top, right,
+#: bottom and left.
+
+window_padding_width 0
+
+#: The window padding (in pts) (blank area between the text and the
+#: window border). A single value sets all four sides. Two values set
+#: the vertical and horizontal sides. Three values set top, horizontal
+#: and bottom. Four values set top, right, bottom and left.
+
+placement_strategy center
+
+#: When the window size is not an exact multiple of the cell size, the
+#: cell area of the terminal window will have some extra padding on
+#: the sides. You can control how that padding is distributed with
+#: this option. Using a value of center means the cell area will be
+#: placed centrally. A value of top-left means the padding will be on
+#: only the bottom and right edges.
+
+active_border_color #00ff00
+
+#: The color for the border of the active window. Set this to none to
+#: not draw borders around the active window.
+
+inactive_border_color #cccccc
+
+#: The color for the border of inactive windows
+
+bell_border_color #ff5a00
+
+#: The color for the border of inactive windows in which a bell has
+#: occurred
+
+inactive_text_alpha 1.0
+
+#: Fade the text in inactive windows by the specified amount (a number
+#: between zero and one, with zero being fully faded).
+
+hide_window_decorations no
+
+#: Hide the window decorations (title-bar and window borders) with
+#: yes. On macOS, titlebar-only can be used to only hide the titlebar.
+#: Whether this works and exactly what effect it has depends on the
+#: window manager/operating system.
+
+resize_debounce_time 0.1
+
+#: The time (in seconds) to wait before redrawing the screen when a
+#: resize event is received. On platforms such as macOS, where the
+#: operating system sends events corresponding to the start and end of
+#: a resize, this number is ignored.
+
+resize_draw_strategy static
+
+#: Choose how kitty draws a window while a resize is in progress. A
+#: value of static means draw the current window contents, mostly
+#: unchanged. A value of scale means draw the current window contents
+#: scaled. A value of blank means draw a blank window. A value of size
+#: means show the window size in cells.
+
+resize_in_steps no
+
+#: Resize the OS window in steps as large as the cells, instead of
+#: with the usual pixel accuracy. Combined with an
+#: initial_window_width and initial_window_height in number of cells,
+#: this option can be used to keep the margins as small as possible
+#: when resizing the OS window. Note that this does not currently work
+#: on Wayland.
+
+confirm_os_window_close 0
+
+#: Ask for confirmation when closing an OS window or a tab that has at
+#: least this number of kitty windows in it. A value of zero disables
+#: confirmation. This confirmation also applies to requests to quit
+#: the entire application (all OS windows, via the quit action).
+
+#: }}}
+
+#: Tab bar {{{
+
+tab_bar_edge bottom
+
+#: Which edge to show the tab bar on, top or bottom
+
+tab_bar_margin_width 0.0
+
+#: The margin to the left and right of the tab bar (in pts)
+
+tab_bar_style fade
+
+#: The tab bar style, can be one of: fade, separator, powerline, or
+#: hidden. In the fade style, each tab's edges fade into the
+#: background color, in the separator style, tabs are separated by a
+#: configurable separator, and the powerline shows the tabs as a
+#: continuous line.
+
+tab_bar_min_tabs 2
+
+#: The minimum number of tabs that must exist before the tab bar is
+#: shown
+
+tab_switch_strategy previous
+
+#: The algorithm to use when switching to a tab when the current tab
+#: is closed. The default of previous will switch to the last used
+#: tab. A value of left will switch to the tab to the left of the
+#: closed tab. A value of last will switch to the right-most tab.
+
+tab_fade 0.25 0.5 0.75 1
+
+#: Control how each tab fades into the background when using fade for
+#: the tab_bar_style. Each number is an alpha (between zero and one)
+#: that controls how much the corresponding cell fades into the
+#: background, with zero being no fade and one being full fade. You
+#: can change the number of cells used by adding/removing entries to
+#: this list.
+
+tab_separator " ┇"
+
+#: The separator between tabs in the tab bar when using separator as
+#: the tab_bar_style.
+
+tab_title_template "{title}"
+
+#: A template to render the tab title. The default just renders the
+#: title. If you wish to include the tab-index as well, use something
+#: like: {index}: {title}. Useful if you have shortcuts mapped for
+#: goto_tab N. In addition you can use {layout_name} for the current
+#: layout name and {num_windows} for the number of windows in the tab.
+#: Note that formatting is done by Python's string formatting
+#: machinery, so you can use, for instance, {layout_name[:2].upper()}
+#: to show only the first two letters of the layout name, upper-cased.
+
+active_tab_title_template none
+
+#: Template to use for active tabs, if not specified falls back to
+#: tab_title_template.
+
+active_tab_foreground   #000
+active_tab_background   #eee
+active_tab_font_style   bold-italic
+inactive_tab_foreground #444
+inactive_tab_background #999
+inactive_tab_font_style normal
+
+#: Tab bar colors and styles
+
+tab_bar_background none
+
+#: Background color for the tab bar. Defaults to using the terminal
+#: background color.
+
+#: }}}
+
+#: Color scheme {{{
+
+foreground #dddddd
+background #000000
+
+#: The foreground and background colors
+
+background_opacity 1.0
+
+#: The opacity of the background. A number between 0 and 1, where 1 is
+#: opaque and 0 is fully transparent.  This will only work if
+#: supported by the OS (for instance, when using a compositor under
+#: X11). Note that it only sets the background color's opacity in
+#: cells that have the same background color as the default terminal
+#: background. This is so that things like the status bar in vim,
+#: powerline prompts, etc. still look good.  But it means that if you
+#: use a color theme with a background color in your editor, it will
+#: not be rendered as transparent.  Instead you should change the
+#: default background color in your kitty config and not use a
+#: background color in the editor color scheme. Or use the escape
+#: codes to set the terminals default colors in a shell script to
+#: launch your editor.  Be aware that using a value less than 1.0 is a
+#: (possibly significant) performance hit.  If you want to dynamically
+#: change transparency of windows set dynamic_background_opacity to
+#: yes (this is off by default as it has a performance cost)
+
+background_image none
+
+#: Path to a background image. Must be in PNG format.
+
+background_image_layout tiled
+
+#: Whether to tile or scale the background image.
+
+background_image_linear no
+
+#: When background image is scaled, whether linear interpolation
+#: should be used.
+
+dynamic_background_opacity no
+
+#: Allow changing of the background_opacity dynamically, using either
+#: keyboard shortcuts (increase_background_opacity and
+#: decrease_background_opacity) or the remote control facility.
+
+background_tint 0.0
+
+#: How much to tint the background image by the background color. The
+#: tint is applied only under the text area, not margin/borders. Makes
+#: it easier to read the text. Tinting is done using the current
+#: background color for each window. This setting applies only if
+#: background_opacity is set and transparent windows are supported or
+#: background_image is set.
+
+dim_opacity 0.75
+
+#: How much to dim text that has the DIM/FAINT attribute set. One
+#: means no dimming and zero means fully dimmed (i.e. invisible).
+
+selection_foreground #000000
+
+#: The foreground for text selected with the mouse. A value of none
+#: means to leave the color unchanged.
+
+selection_background #fffacd
+
+#: The background for text selected with the mouse.
+
+
+#: The 16 terminal colors. There are 8 basic colors, each color has a
+#: dull and bright version. You can also set the remaining colors from
+#: the 256 color table as color16 to color255.
+
+color0 #000000
+color8 #767676
+
+#: black
+
+color1 #cc0403
+color9 #f2201f
+
+#: red
+
+color2  #19cb00
+color10 #23fd00
+
+#: green
+
+color3  #cecb00
+color11 #fffd00
+
+#: yellow
+
+color4  #0d73cc
+color12 #1a8fff
+
+#: blue
+
+color5  #cb1ed1
+color13 #fd28ff
+
+#: magenta
+
+color6  #0dcdcd
+color14 #14ffff
+
+#: cyan
+
+color7  #dddddd
+color15 #ffffff
+
+#: white
+
+mark1_foreground black
+
+#: Color for marks of type 1
+
+mark1_background #98d3cb
+
+#: Color for marks of type 1 (light steel blue)
+
+mark2_foreground black
+
+#: Color for marks of type 2
+
+mark2_background #f2dcd3
+
+#: Color for marks of type 1 (beige)
+
+mark3_foreground black
+
+#: Color for marks of type 3
+
+mark3_background #f274bc
+
+#: Color for marks of type 1 (violet)
+
+#: }}}
+
+#: Advanced {{{
+
+shell .
+
+#: The shell program to execute. The default value of . means to use
+#: whatever shell is set as the default shell for the current user.
+#: Note that on macOS if you change this, you might need to add
+#: --login to ensure that the shell starts in interactive mode and
+#: reads its startup rc files.
+
+editor .
+
+#: The console editor to use when editing the kitty config file or
+#: similar tasks. A value of . means to use the environment variables
+#: VISUAL and EDITOR in that order. Note that this environment
+#: variable has to be set not just in your shell startup scripts but
+#: system-wide, otherwise kitty will not see it.
+
+close_on_child_death no
+
+#: Close the window when the child process (shell) exits. If no (the
+#: default), the terminal will remain open when the child exits as
+#: long as there are still processes outputting to the terminal (for
+#: example disowned or backgrounded processes). If yes, the window
+#: will close as soon as the child process exits. Note that setting it
+#: to yes means that any background processes still using the terminal
+#: can fail silently because their stdout/stderr/stdin no longer work.
+
+allow_remote_control no
+
+#: Allow other programs to control kitty. If you turn this on other
+#: programs can control all aspects of kitty, including sending text
+#: to kitty windows, opening new windows, closing windows, reading the
+#: content of windows, etc.  Note that this even works over ssh
+#: connections. You can chose to either allow any program running
+#: within kitty to control it, with yes or only programs that connect
+#: to the socket specified with the kitty --listen-on command line
+#: option, if you use the value socket-only. The latter is useful if
+#: you want to prevent programs running on a remote computer over ssh
+#: from controlling kitty.
+
+listen_on none
+
+#: Tell kitty to listen to the specified unix/tcp socket for remote
+#: control connections. Note that this will apply to all kitty
+#: instances. It can be overridden by the kitty --listen-on command
+#: line flag. This option accepts only UNIX sockets, such as
+#: unix:${TEMP}/mykitty or (on Linux) unix:@mykitty. Environment
+#: variables are expanded. If {kitty_pid} is present then it is
+#: replaced by the PID of the kitty process, otherwise the PID of the
+#: kitty process is appended to the value, with a hyphen. This option
+#: is ignored unless you also set allow_remote_control to enable
+#: remote control. See the help for kitty --listen-on for more
+#: details.
+
+# env
+
+#: Specify environment variables to set in all child processes. Note
+#: that environment variables are expanded recursively, so if you
+#: use::
+
+#:     env MYVAR1=a
+#:     env MYVAR2=${MYVAR1}/${HOME}/b
+
+#: The value of MYVAR2 will be a/<path to home directory>/b.
+
+update_check_interval 24
+
+#: Periodically check if an update to kitty is available. If an update
+#: is found a system notification is displayed informing you of the
+#: available update. The default is to check every 24 hrs, set to zero
+#: to disable.
+
+startup_session none
+
+#: Path to a session file to use for all kitty instances. Can be
+#: overridden by using the kitty --session command line option for
+#: individual instances. See
+#: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty
+#: documentation for details. Note that relative paths are interpreted
+#: with respect to the kitty config directory. Environment variables
+#: in the path are expanded.
+
+clipboard_control write-clipboard write-primary
+
+#: Allow programs running in kitty to read and write from the
+#: clipboard. You can control exactly which actions are allowed. The
+#: set of possible actions is: write-clipboard read-clipboard write-
+#: primary read-primary. You can additionally specify no-append to
+#: disable kitty's protocol extension for clipboard concatenation. The
+#: default is to allow writing to the clipboard and primary selection
+#: with concatenation enabled. Note that enabling the read
+#: functionality is a security risk as it means that any program, even
+#: one running on a remote server via SSH can read your clipboard.
+
+term xterm-kitty
+
+#: The value of the TERM environment variable to set. Changing this
+#: can break many terminal programs, only change it if you know what
+#: you are doing, not because you read some advice on Stack Overflow
+#: to change it. The TERM variable is used by various programs to get
+#: information about the capabilities and behavior of the terminal. If
+#: you change it, depending on what programs you run, and how
+#: different the terminal you are changing it to is, various things
+#: from key-presses, to colors, to various advanced features may not
+#: work.
+
+#: }}}
+
+#: OS specific tweaks {{{
+
+macos_titlebar_color system
+
+#: Change the color of the kitty window's titlebar on macOS. A value
+#: of system means to use the default system color, a value of
+#: background means to use the background color of the currently
+#: active window and finally you can use an arbitrary color, such as
+#: #12af59 or red. WARNING: This option works by using a hack, as
+#: there is no proper Cocoa API for it. It sets the background color
+#: of the entire window and makes the titlebar transparent. As such it
+#: is incompatible with background_opacity. If you want to use both,
+#: you are probably better off just hiding the titlebar with
+#: hide_window_decorations.
+
+macos_option_as_alt no
+
+#: Use the option key as an alt key. With this set to no, kitty will
+#: use the macOS native Option+Key = unicode character behavior. This
+#: will break any Alt+key keyboard shortcuts in your terminal
+#: programs, but you can use the macOS unicode input technique. You
+#: can use the values: left, right, or both to use only the left,
+#: right or both Option keys as Alt, instead.
+
+macos_hide_from_tasks no
+
+#: Hide the kitty window from running tasks (Option+Tab) on macOS.
+
+macos_quit_when_last_window_closed no
+
+#: Have kitty quit when all the top-level windows are closed. By
+#: default, kitty will stay running, even with no open windows, as is
+#: the expected behavior on macOS.
+
+macos_window_resizable yes
+
+#: Disable this if you want kitty top-level (OS) windows to not be
+#: resizable on macOS.
+
+macos_thicken_font 0
+
+#: Draw an extra border around the font with the given width, to
+#: increase legibility at small font sizes. For example, a value of
+#: 0.75 will result in rendering that looks similar to sub-pixel
+#: antialiasing at common font sizes.
+
+macos_traditional_fullscreen no
+
+#: Use the traditional full-screen transition, that is faster, but
+#: less pretty.
+
+macos_show_window_title_in all
+
+#: Show or hide the window title in the macOS window or menu-bar. A
+#: value of window will show the title of the currently active window
+#: at the top of the macOS window. A value of menubar will show the
+#: title of the currently active window in the macOS menu-bar, making
+#: use of otherwise wasted space. all will show the title everywhere
+#: and none hides the title in the window and the menu-bar.
+
+macos_custom_beam_cursor no
+
+#: Enable/disable custom mouse cursor for macOS that is easier to see
+#: on both light and dark backgrounds. WARNING: this might make your
+#: mouse cursor invisible on dual GPU machines.
+
+linux_display_server auto
+
+#: Choose between Wayland and X11 backends. By default, an appropriate
+#: backend based on the system state is chosen automatically. Set it
+#: to x11 or wayland to force the choice.
+
+#: }}}
+
+#: Keyboard shortcuts {{{
+
+#: For a list of key names, see: the GLFW key macros
+#: <https://github.com/kovidgoyal/kitty/blob/master/glfw/glfw3.h#L349>.
+#: The name to use is the part after the GLFW_KEY_ prefix. For a list
+#: of modifier names, see: GLFW mods
+#: <https://www.glfw.org/docs/latest/group__mods.html>
+
+#: On Linux you can also use XKB key names to bind keys that are not
+#: supported by GLFW. See XKB keys
+#: <https://github.com/xkbcommon/libxkbcommon/blob/master/xkbcommon/xkbcommon-
+#: keysyms.h> for a list of key names. The name to use is the part
+#: after the XKB_KEY_ prefix. Note that you can only use an XKB key
+#: name for keys that are not known as GLFW keys.
+
+#: Finally, you can use raw system key codes to map keys, again only
+#: for keys that are not known as GLFW keys. To see the system key
+#: code for a key, start kitty with the kitty --debug-keyboard option.
+#: Then kitty will output some debug text for every key event. In that
+#: text look for ``native_code`` the value of that becomes the key
+#: name in the shortcut. For example:
+
+#: .. code-block:: none
+
+#:     on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a'
+
+#: Here, the key name for the A key is 0x61 and you can use it with::
+
+#:     map ctrl+0x61 something
+
+#: to map ctrl+a to something.
+
+#: You can use the special action no_op to unmap a keyboard shortcut
+#: that is assigned in the default configuration::
+
+#:     map kitty_mod+space no_op
+
+#: You can combine multiple actions to be triggered by a single
+#: shortcut, using the syntax below::
+
+#:     map key combine <separator> action1 <separator> action2 <separator> action3 ...
+
+#: For example::
+
+#:     map kitty_mod+e combine : new_window : next_layout
+
+#: this will create a new window and switch to the next available
+#: layout
+
+#: You can use multi-key shortcuts using the syntax shown below::
+
+#:     map key1>key2>key3 action
+
+#: For example::
+
+#:     map ctrl+f>2 set_font_size 20
+
+kitty_mod ctrl+shift
+
+#: The value of kitty_mod is used as the modifier for all default
+#: shortcuts, you can change it in your kitty.conf to change the
+#: modifiers for all the default shortcuts.
+
+clear_all_shortcuts no
+
+#: You can have kitty remove all shortcut definition seen up to this
+#: point. Useful, for instance, to remove the default shortcuts.
+
+# kitten_alias hints hints --hints-offset=0
+
+#: You can create aliases for kitten names, this allows overriding the
+#: defaults for kitten options and can also be used to shorten
+#: repeated mappings of the same kitten with a specific group of
+#: options. For example, the above alias changes the default value of
+#: kitty +kitten hints --hints-offset to zero for all mappings,
+#: including the builtin ones.
+
+#: Clipboard {{{
+
+map kitty_mod+c copy_to_clipboard
+
+#: There is also a copy_or_interrupt action that can be optionally
+#: mapped to Ctrl+c. It will copy only if there is a selection and
+#: send an interrupt otherwise. Similarly, copy_and_clear_or_interrupt
+#: will copy and clear the selection or send an interrupt if there is
+#: no selection.
+
+map kitty_mod+v  paste_from_clipboard
+map kitty_mod+s  paste_from_selection
+map shift+insert paste_from_selection
+map kitty_mod+o  pass_selection_to_program
+
+#: You can also pass the contents of the current selection to any
+#: program using pass_selection_to_program. By default, the system's
+#: open program is used, but you can specify your own, the selection
+#: will be passed as a command line argument to the program, for
+#: example::
+
+#:     map kitty_mod+o pass_selection_to_program firefox
+
+#: You can pass the current selection to a terminal program running in
+#: a new kitty window, by using the @selection placeholder::
+
+#:     map kitty_mod+y new_window less @selection
+
+#: }}}
+
+#: Scrolling {{{
+
+map kitty_mod+up        scroll_line_up
+map kitty_mod+k         scroll_line_up
+map kitty_mod+down      scroll_line_down
+map kitty_mod+j         scroll_line_down
+map kitty_mod+page_up   scroll_page_up
+map kitty_mod+page_down scroll_page_down
+map kitty_mod+home      scroll_home
+map kitty_mod+end       scroll_end
+map kitty_mod+h         show_scrollback
+
+#: You can pipe the contents of the current screen + history buffer as
+#: STDIN to an arbitrary program using the ``launch`` function. For
+#: example, the following opens the scrollback buffer in less in an
+#: overlay window::
+
+#:     map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R
+
+#: For more details on piping screen and buffer contents to external
+#: programs, see launch.
+
+#: }}}
+
+#: Window management {{{
+
+map kitty_mod+enter new_window
+
+#: You can open a new window running an arbitrary program, for
+#: example::
+
+#:     map kitty_mod+y      launch mutt
+
+#: You can open a new window with the current working directory set to
+#: the working directory of the current window using::
+
+#:     map ctrl+alt+enter    launch --cwd=current
+
+#: You can open a new window that is allowed to control kitty via the
+#: kitty remote control facility by prefixing the command line with @.
+#: Any programs running in that window will be allowed to control
+#: kitty. For example::
+
+#:     map ctrl+enter launch --allow-remote-control some_program
+
+#: You can open a new window next to the currently active window or as
+#: the first window, with::
+
+#:     map ctrl+n launch --location=neighbor some_program
+#:     map ctrl+f launch --location=first some_program
+
+#: For more details, see launch.
+
+map kitty_mod+n new_os_window
+
+#: Works like new_window above, except that it opens a top level OS
+#: kitty window. In particular you can use new_os_window_with_cwd to
+#: open a window with the current working directory.
+
+map kitty_mod+w close_window
+map kitty_mod+] next_window
+map kitty_mod+[ previous_window
+map kitty_mod+f move_window_forward
+map kitty_mod+b move_window_backward
+map kitty_mod+` move_window_to_top
+map kitty_mod+r start_resizing_window
+map kitty_mod+1 first_window
+map kitty_mod+2 second_window
+map kitty_mod+3 third_window
+map kitty_mod+4 fourth_window
+map kitty_mod+5 fifth_window
+map kitty_mod+6 sixth_window
+map kitty_mod+7 seventh_window
+map kitty_mod+8 eighth_window
+map kitty_mod+9 ninth_window
+map kitty_mod+0 tenth_window
+#: }}}
+
+#: Tab management {{{
+
+map kitty_mod+right next_tab
+map kitty_mod+left  previous_tab
+map kitty_mod+t     new_tab
+map kitty_mod+q     close_tab
+map kitty_mod+.     move_tab_forward
+map kitty_mod+,     move_tab_backward
+map kitty_mod+alt+t set_tab_title
+
+#: You can also create shortcuts to go to specific tabs, with 1 being
+#: the first tab, 2 the second tab and -1 being the previously active
+#: tab, and any number larger than the last tab being the last tab::
+
+#:     map ctrl+alt+1 goto_tab 1
+#:     map ctrl+alt+2 goto_tab 2
+
+#: Just as with new_window above, you can also pass the name of
+#: arbitrary commands to run when using new_tab and use
+#: new_tab_with_cwd. Finally, if you want the new tab to open next to
+#: the current tab rather than at the end of the tabs list, use::
+
+#:     map ctrl+t new_tab !neighbor [optional cmd to run]
+#: }}}
+
+#: Layout management {{{
+
+map kitty_mod+l next_layout
+
+#: You can also create shortcuts to switch to specific layouts::
+
+#:     map ctrl+alt+t goto_layout tall
+#:     map ctrl+alt+s goto_layout stack
+
+#: Similarly, to switch back to the previous layout::
+
+#:    map ctrl+alt+p last_used_layout
+#: }}}
+
+#: Font sizes {{{
+
+#: You can change the font size for all top-level kitty OS windows at
+#: a time or only the current one.
+
+map kitty_mod+equal     change_font_size all +2.0
+map kitty_mod+minus     change_font_size all -2.0
+map kitty_mod+backspace change_font_size all 0
+
+#: To setup shortcuts for specific font sizes::
+
+#:     map kitty_mod+f6 change_font_size all 10.0
+
+#: To setup shortcuts to change only the current OS window's font
+#: size::
+
+#:     map kitty_mod+f6 change_font_size current 10.0
+#: }}}
+
+#: Select and act on visible text {{{
+
+#: Use the hints kitten to select text and either pass it to an
+#: external program or insert it into the terminal or copy it to the
+#: clipboard.
+
+map kitty_mod+e kitten hints
+
+#: Open a currently visible URL using the keyboard. The program used
+#: to open the URL is specified in open_url_with.
+
+map kitty_mod+p>f kitten hints --type path --program -
+
+#: Select a path/filename and insert it into the terminal. Useful, for
+#: instance to run git commands on a filename output from a previous
+#: git command.
+
+map kitty_mod+p>shift+f kitten hints --type path
+
+#: Select a path/filename and open it with the default open program.
+
+map kitty_mod+p>l kitten hints --type line --program -
+
+#: Select a line of text and insert it into the terminal. Use for the
+#: output of things like: ls -1
+
+map kitty_mod+p>w kitten hints --type word --program -
+
+#: Select words and insert into terminal.
+
+map kitty_mod+p>h kitten hints --type hash --program -
+
+#: Select something that looks like a hash and insert it into the
+#: terminal. Useful with git, which uses sha1 hashes to identify
+#: commits
+
+map kitty_mod+p>n kitten hints --type linenum
+
+#: Select something that looks like filename:linenum and open it in
+#: vim at the specified line number.
+
+
+#: The hints kitten has many more modes of operation that you can map
+#: to different shortcuts. For a full description see kittens/hints.
+#: }}}
+
+#: Miscellaneous {{{
+
+map kitty_mod+f11    toggle_fullscreen
+map kitty_mod+f10    toggle_maximized
+map kitty_mod+u      kitten unicode_input
+map kitty_mod+f2     edit_config_file
+map kitty_mod+escape kitty_shell window
+
+#: Open the kitty shell in a new window/tab/overlay/os_window to
+#: control kitty using commands.
+
+map kitty_mod+a>m    set_background_opacity +0.1
+map kitty_mod+a>l    set_background_opacity -0.1
+map kitty_mod+a>1    set_background_opacity 1
+map kitty_mod+a>d    set_background_opacity default
+map kitty_mod+delete clear_terminal reset active
+
+#: You can create shortcuts to clear/reset the terminal. For example::
+
+#:     # Reset the terminal
+#:     map kitty_mod+f9 clear_terminal reset active
+#:     # Clear the terminal screen by erasing all contents
+#:     map kitty_mod+f10 clear_terminal clear active
+#:     # Clear the terminal scrollback by erasing it
+#:     map kitty_mod+f11 clear_terminal scrollback active
+#:     # Scroll the contents of the screen into the scrollback
+#:     map kitty_mod+f12 clear_terminal scroll active
+
+#: If you want to operate on all windows instead of just the current
+#: one, use all instead of active.
+
+#: It is also possible to remap Ctrl+L to both scroll the current
+#: screen contents into the scrollback buffer and clear the screen,
+#: instead of just clearing the screen::
+
+#:     map ctrl+l combine : clear_terminal scroll active : send_text normal,application \x0c
+
+
+#: You can tell kitty to send arbitrary (UTF-8) encoded text to the
+#: client program when pressing specified shortcut keys. For example::
+
+#:     map ctrl+alt+a send_text all Special text
+
+#: This will send "Special text" when you press the ctrl+alt+a key
+#: combination.  The text to be sent is a python string literal so you
+#: can use escapes like \x1b to send control codes or \u21fb to send
+#: unicode characters (or you can just input the unicode characters
+#: directly as UTF-8 text). The first argument to send_text is the
+#: keyboard modes in which to activate the shortcut. The possible
+#: values are normal or application or kitty or a comma separated
+#: combination of them.  The special keyword all means all modes. The
+#: modes normal and application refer to the DECCKM cursor key mode
+#: for terminals, and kitty refers to the special kitty extended
+#: keyboard protocol.
+
+#: Another example, that outputs a word and then moves the cursor to
+#: the start of the line (same as pressing the Home key)::
+
+#:     map ctrl+alt+a send_text normal Word\x1b[H
+#:     map ctrl+alt+a send_text application Word\x1bOH
+
+#: }}}
+
+#: theme
+
+# Based on https://github.com/morhetz/gruvbox by morhetz <morhetz@gmail.com>
+# Adapted to kitty by wdomitrz <witekdomitrz@gmail.com>
+
+cursor                  #928374
+
+background              #282828
+foreground              #fbf1c7
+selection_foreground    #928374
+selection_background    #ebdbb2
+
+# black
+color0                  #282828
+color8                  #7c6f64
+
+# red
+color1                  #cc241d
+color9                  #fb4934
+
+#: green
+color2                  #98971a
+color10                 #b8bb26
+
+# yellow
+color3                  #d79921
+color11                 #fabd2f
+
+# blue
+color4                  #458588
+color12                 #83a598
+
+# purple
+color5                  #b16286
+color13                 #d3869b
+
+# aqua
+color6                  #689d6a
+color14                 #8ec07c
+
+# white
+color7                  #a89984
+color15                 #fbf1c7